Ammonium Acetate Industrial Grade

Ammonium Acetate Industrial Grade – Identification of Product Chemical Code: CHE-A23 Chemical Name: Ammonium Acetate Chemical Grade: Industrial Grade Chemical Formula: C₂H₇NO₂ Chemical Weight: 77.08 g/mol CAS No: 631-61-8 Chemical Synonyms: Ammonium Acetate Industrial Grade – Hazards Identification REACH No: No Data Available Signal Word: Supplemental Hazard Information: Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008. Additional Hazard Information: Ammonium Acetate Industrial Grade – Composition of Chemical Chemical Formula: C₂H₇NO₂ EC No 1272/2008: No Data Available Ammonium Acetate Industrial Grade – First Aid Measures General Advice: No Data Available If: Inhaled: If breathed in, move person into fresh air. If not breathing, give artificial respiration. If: Skin Contact: Wash off with soap and plenty of water. If: Eye Contac: Flush eyes with water as a precaution. If: Swallowed: Never give anything by mouth to an unconscious person. Rinse mouth with water. Important Symptoms: The most important known symptoms and effects are described in the labeling section. Immediate Medical Attention: No Data Available Ammonium Acetate Industrial Grade – Firefighting Measures Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or Carbon Dioxide. Hazards Arising: Carbon Oxides, Nitrogen Oxides (NOx) Advice for Firefighters: Wear self contained breathing apparatus for fire fighting if necessary. Info for Firefighting: No Data Available Ammonium Acetate Industrial Grade – Accidental Release Measures Personal Precautions: Avoid dust formation. Avoid breathing vapours, mist or gas. Enviromental Precautions: Do not let product enter drains. Method for Containment: Sweep up and shovel. Keep in suitable, closed containers for disposal. Handling and Storage Personal Precautions: Provide appropriate exhaust ventilation at places where dust is formed. Enviromental Precautions: Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Recommended storage temperature: 2 – 8 °C. Hygroscopic. Exposure Controls | Personal Protection Derived No Effect Level (DNEL) Workers | Application Area | Exposure Routes | Health Effect | Value No Data Available Consumers | Application Area | Exposure Routes | Health Effect | Value No Data Available Predicted No Effect Concentration (PNEC) No Data Available Engineering Controls: General industrial hygiene practice Eye/Face Protection: Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166 (EU). Skin Protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching gloves outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min. Material tested: Dermatril® Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min. Material tested: Dermatril® Data source: KCL GmbH, D-36124, Test method: EN 374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario. Body Protection: Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory Protection: Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Physical and Chemical Properties Appearance: White deliquescent crystal with a slight Acetic odour Odour: Slight Acetic odour Odour Threshold: No Data Available pH: 6.5 – 7.5 at 77.1 g/l at 25°C Melting Point: Melting point/range: 110 – 112°C Boiling Point: No Data Available Flash Point: No Data Available Evaporation: No Data Available Flammability: No Data Available Upper/Lower Flammability or Explosive Limits: No Data Available Vapour pressure: No Data Available Vapour density: No Data Available Relative density: No Data Available Water solubility: 77.1 g/l at 20°C – completely soluble Partition Coefficien: No Data Available Auto-ignition Temperature: No Data Available Decomposition Temperature: No Data Available Viscosity: No Data Available Explosive properties: No Data Available Oxidizing properties: No Data Available Other Safety Info: No Data Available Stability and Reactivity Reactivity: No Data Available Chemical Stability: Stable under recommended storage conditions Possibility of hazardous reactions: No Data Available Conditions to Avoid: Exposure to moisture Incompatible Materials: Strong Oxidizing Agents, Strong Acids Hazardous Decomposition Products: No Data Available Toxicological Information Acute Toxicity: LD50 Intraperitoneal – mouse – 736 mg/kg Skin Corrosion/Irritation: No Data Available Serious Eye damage | Eye Irritation: No Data Available Cell Mutagenicity: No Data Available Carcinogenicity: IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity: No Data Available Specific Target Organ Toxicity – Single Exposure: No Data Available Specific Target Organ Toxicity – Repeated Exposure: No Data Available Aspiration Hazard: No Data Available Ecological Information Ecological Toxicity: Toxicity to fish LC50 – Cyprinus carpio (Carp) – 56 mg/l – 48 h Ecological Persistence and degradability: Biodegradability Result: Readily biodegradable Bioaccumulative Potential: No Data Available Mobility in Soil: No Data Available Results of PBT and vPvB Assessment: PBT/vPvB assessment not available as chemical safety assessment not required/not conducted Other Adverse Effect: No Data Available Disposal Considerations Waste Treatment Methods: Product Offer surplus and non-recyclable solutions to a licensed disposal company. Contaminated packaging Dispose of as unused product Transport Information UN Number: ADR/RID: – IMDG: – IATA: – UN Shipping Hazard: ADR/RID: Not dangerous goods IMDG: Not dangerous goods IATA: Not dangerous goods Transport Hazard Class: ADR/RID: – IMDG: – IATA: – Packaging Group: ADR/RID: – IMDG: – IATA: – Enviromental Hazards: ADR/RID: no IMDG Marine pollutant: no IATA: no Special Precautions: No Data Available Regulatory Information Safety, Health and environmental regulations: This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006 Chemical Safety Assessment: For this product a chemical safety assessment was not carried out. Additional Info: RTECS: AF3675000 Gastrointestinal disturbance. To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Disclaimer The information stated above is considered to be correct, but does not claim to be inclusive and shall only be used as a guideline. The information provided by this document is confirmed by our continuous updating of knowledge and adheres to the products appropriate safety precautions. It does not represent any guarantee of the product’s properties.RLS Chemicals and its Associates shall not be held accountable for any damage’s consequent of handling the above product.
Availability: 4 in stock (can be backordered)
• CAS Number: 631-61-8
• Chemical Code: CHE-A23
• Chemical Grade: Industrial Grade
• Chemical Formula: C₂H₇NO₂
• Chemical Weight: 77.08 g/mol
• Synonyms: Acetic Acid, Ammonium salt, Ammonium Acetate
• Appearance: White deliquescent crystal with a slight Acetic odour
• Odour: Slight Acetic odour
• pH: 6.5 – 7.5 at 77.1 g/l at 25°C
• Melting Point: 110 – 112°C
• Water solubility: 77.1 g/l at 20°C – completely soluble
• Storage temperature: 2 – 8 °C
• Hygroscopic: Yes

• CAS Number: 631-61-8
• Chemical Formula: C₂H₇NO₂
• Chemical Weight: 77.08 g/mol
• Industrial Grade
• White deliquescent crystal with a slight Acetic odour
• pH: 6.5 – 7.5
• Melting Point: 110 – 112°C
• Water solubility: 77.1 g/l at 20°C